S311D > Shop_en

본문 바로가기

K 1595
Seatpost > StVZO
S311D
$90.00

In the S311D version, the light is powered by a hub dynamo.

Features +

선택된 옵션

Product Details
  • Features

    Patented seatpost with an integrated seat rail clamp. The seatpost tube features 5 holes in which the LEDs are enclosed. A cable with two open ends extends out of the lower end of the seatpost tube for connection to the bicycle dynamo.



    Diameter 

    27.2/30.9/31.6 (mm) 

    Length 

    D27.2mm (350mm) / D31.6mm (350, 400mm) 

    Color surface finish 

    Polished Silver / Matt Black 

    Seatpost Type 

    2 bolt clamp, offset 9mm, mechanical stop

    Seapost material 

    Aluminum 6061 T6 

  • Light unit

    Light Type 

    Protruding

    Light Module

    2 wide angle red LEDs, 
    3 high brightness red LEDs. 

    Brightness 

    12cd

    Power source 

    AC 6V(3W) Bicycle Dynamo

    Nominal voltage

    AC 6V

    Power consumption

    0.5W

    Surge Protection

    A zener diode prevents damage to the electonics or the LEDs from voltage surges.

  • ETC

    K-number

    K-1595

    Seatpost test standard

    ISO City

    Compliant with

    standard or directive

    RoHS, StVZO §22a TA Nr.23

    (Rear lights for bicycles), IPX5

    Package Contents

    Rear light seatpost

How to Use
  • Assembly

    Use the correct diameter corresponding to your bicycle frame.

    Use the appropriate tool to fasten the saddle support.

    Adhere to the safety lines of the minimum and maximum insertion heights.

    The rear light may only be operated in the following angular range: Max 76˚, Min 70˚.

    The lower two LEDs may be sunk in the frame. Always pay attention to the mechanical stopper of the maximum insertion depth!

    The rear light must be mounted in such a way that it is illuminated at the rear. The reference axis (see drawing) must be aligned parallel to the bicycle‘s longitudinal axis.
    The two lower LEDs may be inserted into the frame. The minimum insertion length into the frame is 100mm. The rear light must be aligned so that it shines backward. The reference axis (see drawing) must be aligned with the longitudinal axis of the bicycle. A mechanical stopper prevents the insertion of the seatpost to cover the 3rd LED(from the bottom) and damage to the two top protruding LEDs.


    Connecting to the power source

    The connector of built-in light seatpost and the connector of power source should be compatible, which must be ascertained before the purchase of the product. 

  • Function

    The rear light is not equipped with a switch and is therefore on, as long as the dynamo is connected.

    If the rear light is connected to the rear light output of a headlight, it is switched on and off via the headlight switch.

    If the rear light is operated independently of a headlight via the dynamo, the headlight must be switched on separately. 

  • Precautions

    At startup, the product must be dry. Remove any moisture before riding. After installation, test that the seatpost does not drop under load. Take care that the LEDs are not covered by a bag or clothing when riding. Do not make any independent changes to the product. Do not try to open the product.


    Steps to take in

    the event of a failure

     

    If either LED no. 4 or no. 5 is defective, the mode must be switched to the 3 LED mode to conform with the regulation. Repair or replacement is nevertheless recommended. If LED no. 1, no. 2 or no. 3 fails, the seat post must in any case be sent to the importer for repair or replacement.

    In the case of failure of any of the 5 LEDs, the seat post must be sent to the importer for repair or replacement.

    Operating Temperature

    Min: -15° C

    Max: 45° C

    Optimum storage temperature: 20-25°C

FAQ
  • Shipping

    Please be aware before order. The import tax will be charged to you separately. Taxes may vary depending on the country. If you want to return or exchange, you will be charged a Fedex round-trip shipping fee. Prices are inclusive of basic international shipping. Regions where additional shipping fee are generated will be charged at the payment window.

  • Returns and Exchanges

    Returns

    Please send us unused products by prepaid, will refund you after confirming arrival.

    Exchanges

    Please send us unused items by prepaid, and send $25~$35 re-delivery courier fee depending on your location. After receipt the goods and courier fee, we will replace it with another product.

  • Warranty

    Seatpost and light module: 2 years from the date of purchase.

    In case of warranty, (replacement or repair), please contact the distributor through whom the product was purchased.

  • Waste Disposal

    Packaging

    The product packaging is made of recyclable materials.

    Dispose of these environmentally friendly in the provided collection containers.

    Product

    Old appliances and batteries must not be disposed of with normal household waste.

    According to EU Directive 2012/19/EU, the product must be disposed of properly at the end of its service life. Return the old device to a collection point for electronic waste or a recycling center.

  • Malfunctions

     

    The LEDs are numbered from top to bottom

    If LED numbers 4 or 5, or 4 and 5 are defective, it is permissible to switch to the 3-LED mode, which complies with the approval. A repair or replacement is still recommended.

    If LED numbers 1, 2 or 3 are defective, the seatpost must be sent to the importer for repair or completely replaced.


  • 상호명에버그린아이앤디
  • 주소경남 거창군 거창읍 밤티재로 1273-39
  • 대표이재용
  • 사업자번호621-13-87482
  • 고객센터070-4222-1273